|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 30 x 19 The following products presented in this data sheet are being withdrawn. Ordering Code B65702A50000000 B65701D0000R026 Substitute Product Date of Withdrawal 2004-10-18 2002-08-02 Deadline Last Orders 2005-03-31 2002-12-31 Last Shipments 2005-09-30 2003-03-31 B65701D0000R048 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. P 30 x 19 Core I In accordance with IEC 60133 I Pot cores are supplied in sets B65701 20,9 _ 0,9 Magnetic characteristics (per set) with without center hole center hole 25+0,8 4,7+0,6 30,5 _ 1 0,8+0,2 19 _ 0,4 13+0,4 Approx. weight (per set) m 36 37 g M3 FPK0155-U Gapped Material AL value nH N48 250 2 % 400 2 % 630 3 % 1000 3 % 2000 5 % s approx. mm 0,72 0,40 0,22 0,12 0,05 e Ordering code 1) -D with center hole -T with threaded sleeve B65701-+250-G48 B65701-+400-A48 B65701-+630-A48 B65701-+1000-A48 B65701-D2000-J48 66 105 166 263 525 Ungapped Material AL value nH N26 N87 N30 T38 6200 + 30/- 20 % 1630 6400 + 30/- 20 % 1630 3800 11500 + 30/- 20 % 2930 28000 + 40/- 30 % 7130 e AL1min PV nH W/set Ordering code -D with center hole -W without center hole B65701-D-R26 < 2,5 B65701-W-R87 (200 mT, 100 kHz, 100 C) B65701-W-R30 B65701-W-Y38 1) Replace the + by the code letter "D" or "T" for the required version. 348 08/01 3,750,15 l/A le Ae A min Ve 0,33 45 136 -- 6 100 0,32 46 145 117 6 670 mm-1 mm mm2 mm2 mm3 o13,5 _ 0,4 o5,4+0,2 s P 30 x 19 Accessories Coil former Standard: Material: Winding: to IEC 60133 GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black see "Processing Notes", page 155 B65702 Insulating washer 1 between core and coil former I For tolerance compensation and for insulation I Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120C), 0,06 mm thick Insulating washer 2 between core and terminal carrier I For increased dielectric strength I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120C), 0,08 mm thick Ordering code Coil former Sections 1 2 AN mm2 48 45 lN mm 60 60 A R value 46 49 B65702-B-T1 B65702-B-T2 B65702-A5000 B65702-A5002 Insulating washer 1 (reel packing, PU = 1 reel) Insulating washer 2 (bulk) Coil former AN 3+0,8 24,7 _ 0,2 o13,7+0,2 0,7 12,8 _ 0,2 o15 _ 0,2 0,7 FPK0340-T Insulating washer 1 3,8 Insulating washer 2 23,8 _ 0,4 o13,30,2 o25,40,2 3,9+0,2 20,2 FPK0157-B 30,3 _ 0,5 FPK0158-J 349 08/01 P 30 x 19 Accessories Mounting assembly for printed circuit boards I The set comprises a terminal carrier and a yoke I For snap-in connection B65705 Terminal carrier GFR polyterephthalate (UL 94 V-0, insulation class to IEC 85: F max. operating temperature 155 C), color code gray Solderability: to IEC 68-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 68-2-20, test Tb, method 1B: 350 C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,5 mm), with ground terminal Complete mounting assembly (8 solder terminals) Ordering code: B65705-B3 Material: Grounding pin This recess must be on the side of the grounding pin to ensure that the yoke locks into position. Hole arrangement View in mounting direction Ground 1) The 2,8 mm hole is only necessary for additional fixing with M 2,5 screw. a) Yoke b) Terminal carrier with 8 solder terminals 350 08/01 P 30 x 19 Accessories Adjusting screw I Tube core with thread and core brake made of GFR polyterephthalate B63399 B65679 Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core P 30 x 19 Material N 48 AL value nH 250 400 630 630 1000 Handle Adjusting screw Tube core x length mm 4,55 x 6,3 4,98 x 6,3 5,15 x 6,3 Material N 22 N 22 N 22 Color code red black white Min. adjusting range % 16 18 11 18 10 B65679-E3-X22 B65679-E2-X22 B65679-E1-X22 B63399-B1 B63399-B5 Ordering code Adjusting screwdriver Adjusting screw 1) 1) Due to the limited distance between adjusting screw and internal borehole, the entire assembly must be accurately centered. 351 08/01 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschure werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1 |
Price & Availability of B65702A50000000 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |